In this section I will detail some of the products I have either used directly on my car or have helped someone else with a S197 install/test on their car. I go through a lot of parts testing and trying various setups to get it exactly the way I like it. Most of these products perform very well, because I spent a considerable amount of time researching what others have liked on their cars.

Let me know if you would like further details on the installation or performance of a specific product.

Product Name	Review Notes	Rating	Image
JLT Intake	This is a great intake for the price. Sure the C&L may look a little better, but you can pick these up used for right at $100. My only complaint is that the material the elbow is made of is hard to keep looking nice. Having the intake is nice, because you can take it off and get it out of the way in under 1 minute when you need to. I have seen some independent testing by magazines that show this intake makes as much or more power than any other intake on the market.	★★★★★
SCT XCal 2	Again for the money these are hard to beat. It has all the main features you should need without paying for a bunch of extra junk that you don't. The X-Cal 3 is a little nicer, but usually costs more too.	★★★★☆
BamaChips.com Email Tune	I bought the 93 Race tune. There is no way to describe the difference over the canned JLT tune. For $50 this is like stealing from Doug, because the difference it made on the car was worth way more to me. Excellent service, and he updates your tune for free as you upgrade.	★★★★★
BlowByRacing.com Email Tune	I bought the 93 Race tune at a Christmas special for $35. This was installed after the Bama tune and I thought it had a slight improvement overall. The crazy thing when I had the car dyno tuned 2 years later they could only pull like an extra 2hp and 2ft lb of torque. The tuner couldn't believe how nuts on this tune was.	★★★★★
Bassani Modular X-Pipe	This is the least favorite kit that I have run. I do like the ability to either put on the cats, or the off-road pipes. They installed and fit perfectly. Mine is the aluminized steel version, and it is 2.5" tubing. I eventually switched to the Pypes O/R H-Pipe for better sound.	★★☆☆☆
Pypes O/R H-Pipe (4-piece design)	This kit is by far my favorite mid-pipe if you are not running LT's. It gets a lot of bad rap about fitment, but I have installed 2 kits and have never seen an issue. I do recommend scrapping the clamps they send for the middle and getting some wide band clamps. The sound from these with a chambered muffler is great. These also provide a substantial performance benefit (especially for the money).	★★★★★
MAC Long Tube Headers and O/R ProChamber	This setup provided a lot of power for the money. The sound and performance improvement is substantial. Most of the good power is all on the top end, so the car accelerates considerably better but doesn't have the brute pull off the line because it doesn't add a lot of low-end torque. This will be a great addition for when I add a supercharger.	★★★★☆
Flowmaster 40 Series Weld-In's	These sounded great when I bought the car (and it had the stock H-Pipe), but with the Bassani X they sounded horrible and had to go. I think they would be great with either the Mac Prochamber or the Pypes H-Pipe.	★★★☆☆
Ford Racing GTA Mufflers	I am not a big fan of mufflers on these cars due to the cost and the fact that they really only change the sound. These mufflers don't drone at all. They have a very low deep tone and seem to be a good fit for an H-Pipe or a ProChamber. The huge 4" tips look awesome too!	★★★★☆
Coast 1-Piece Aluminum Driveshaft	I waited to change out the driveshaft based on all the vibration issues people had been having. I researched and came down to Powerhouse and Coast Driveline Gear as the best options. So far I have installed this on two cars with no vibrations. It is an excellent upgrade that really makes the car drive nicer, and provides a noticeable difference in acceleration. Overall a must upgrade if you are looking for a better performing car.	★★★★☆
3D Carbon Eleanor Grille	In my opinion this is the best looking grille you can buy. My only complaint is the bulbs that it comes with are light blue, and they are not bright at all. You can't reuse the stock bulbs that were fine for me. Other than that it is a sweet kit.	★★★★☆
CDC Rear Black Panel	I picked the all black panel with no emblems. I love the look of it. My only complaint with this (and others) is they are not curved perfectly for the rear trunk lid. I would recommend extra double sided tape on the ends and also when you install it hold it down for a day or two on the ends with blue painter tape to make sure it fully adheres.	★★★★☆
eBay GT500 Spoiler	This was a no brainer. I hated the factory GT spoiler, and liked this one. Painted for like $100–120. Perfect addition.	★★★★★
SOS Center Console Switch Panel	This is real nice if you don't know where to mount your switches. I ended up getting rid of it, because I couldn't live without the cupholders. It looks great in the car and I always got compliments on it. I probably should have gotten the 4 button version for when I add nitrous, but there is room for me to add 2–3 more on my own.	★★★☆☆
Mini Raptor Shift Light	The one I got is super small, but also super bright. It is easy to mount anywhere and it doesn't stand out. I mounted mine right at the base of the driver's pillar. You can run the wire right down the corner so nothing shows. The separate RPM Activated Switch is nice, because it is routed to the glove box for easy access if necessary.	★★★★★
Steeda Underdrive Pullies	Nice add-on, but don't expect a real noticeable performance benefit. I think this is a good upgrade if you can find it on sale or used. Installation was easy. I used PB Blaster and a long pry to get the balancer bolt off. Make sure you use RTV on the groove in the bottom pulley or you will most likely have a light oil leak.	★★★★☆
Steeda Delete Plates	If you want every last bit of NA HP you can get this is a decent upgrade. This mod seems to be very dependent on having the right tune. It seems like my BBR tune worked better with this mod than the BamaChips.	★★★☆☆
Autolite Spark Plugs (HT1)	Changed to these after about 22k miles due to concerns of stock 2-piece plugs getting stuck and breaking. Followed procedure with PB Blaster to remove the stock ones, and then put anti-seize on these. Car ran much smoother/better after changing to these plugs.	★★★★☆
Steeda Poly Bushings for Stock Shifter	If you are going to stick with the stock shifter this is a must for $12. This makes the shifter less spongy. Adding this to the stock shifter is my favorite shifter combo thus far. For the price this is a no-brainer if you are staying with the stock shifter.	★★★★★
Saleen Shift Block	This is a cheap way to turn your stock shifter into a short throw (usually $35–40 used). I didn't really like the feel of it. You gotta be careful to not overtighten the bolts or it is horrible (almost unusable)! It really takes adjustment to get it just right.	★☆☆☆☆
Hurst Billet Shifter	This is personal preference for sure, but I only had this on my car for about an hour. I bought it used and got out of it quickly — it was super notchy for me. I wouldn't have liked this as my car is my daily driver. I think that the physics of a short throw shifter makes it too notchy for me.	★★☆☆☆
SLP Line Lock	This is a pretty nice kit. The wiring was already premade, and the brake lines were already bent. The hardest part of the install was snaking the stock brake line out of the car without bending it. Installation of the new parts was easy outside of having enough room to get wrenches in. The kits are different for 05/06 and 07+. Overall this kit has a good price and functions well.	★★★☆☆
MRT Hood Struts	I put this off forever, because I thought other stuff was more important. This is an awesome upgrade. No drilling into your car, and they tuck back so far and lift the hood higher than the prop rod. I can't imagine there is another kit better than this one. The fit and finish were perfect.	★★★★★
LRS Pedal Covers	These pedal covers look nice and they don't show major scratches like others I have had in the past. The pedals are a pain to drill through to mount them. I think there are other options that are better, but for the money these are really good.	★★★☆☆
Midwest Auto Gear Plenum Cover	For the money these are hard to beat. They are very sturdy and have a high quality paint. They are much nicer than the factory covers, and can usually be found for about the same price.	★★★★☆
NX Fuel Fitting	I got this used with my gauges (to hook up my fuel pressure gauge). Pretty standard with 2 ports (one on each side). No leaks and a really nice quality piece.	★★★★☆
Billet Oil/Wiper Fluid/Radiator Fluid Cap Covers	I bought these super cheap on eBay. I believe they are made by BilletPros. They fit well and were well worth what I paid ($25 for all). For someone really into all the appearance changes this is probably a great buy, but for me it is just average.	★★★☆☆
CHE Driveshaft Loop	This is a very sturdy piece (like the other CHE parts I have bought). It was a real pain to install, because you have to drill 8 holes through the floorboard to mount it. It has a ton of clearance with the stock DS though.	★★★★☆
BMR Billet Lower Control Arms (LCA)	This piece looks very nice, but I would have preferred to get the standard BMR LCA's. I had one problem with a bushing (forgot to grease one fitting), but other than that it has been fine. Personally I would stick to the tubular ones that are half the cost.	★★★☆☆
CHE Anti-Squat Brackets	For bolt-in relocation brackets these are perfect. They fit very tight (one was very hard to get on), but they are more than sturdy for what I need. For some real high HP/Torque applications it would be better to have weld-in brackets, but for my car this is more than adequate.	★★★★☆
CHE K-Member w/Torque Limiters	This mod tightened up the front end quite a bit with the k-member brace. I later installed the torque limiters, and it seemed to help keep the shifting nice and smooth even under full throttle. This will probably be more important for my car after I install a major power adder.	★★★★☆
Roush Rear Lowering Springs	If your car is a daily driver and you don't want a radical drop this is a great option. I have gotten a lot of compliments about the stance of my car (the wheel/tire combo adds a lot too). I chose these also because I didn't want to mess with the front ones. This leveled off my car perfectly, and was a super easy install (took maybe 30 minutes tops).	★★★★★
Ford Racing Black FR500 Rims (24mm offset)	These are only made with an offset for 99–04 Mustangs, but with a 255/45/18 tire they are the perfect fit for me. I bought them with 285/40/18's but they stuck out a bit on the sides. I like the 255's better because I can rotate the tires as well.	★★★★☆
Nitto 555 Tires	These hook surprisingly well on the street. I have been real happy with them so far. Not sure what the life expectancy is for these, because I got my first ones used.	★★★★☆
Weld Drag Lites XPS Series	Got these used as the XPS series which come in 16" size is discontinued. They are perfect because they clear the calipers. The offset limits the width of the tire, but with the ET Streets I am running they hook excellent. You need really long lugs to run these, because the stock studs are not terribly long.	★★★★★
Mickey Thompson ET Streets	If you need traction these are the tires you need. These should be enough to hold as much power as my car will build as long as they are heated up. I have run pretty consistent 1.7X 60" times with these on a NA car.	★★★★★
Black Turn Signal Bumper Lights	These are pretty cheap, and add a lot of look to many colors of car. What I like about them is they have a black back bezel finish and a clear lens similar to the stock headlights (so they kind of match the stock look pretty well). Get these on eBay as they are much cheaper there.	★★★★☆
Pioneer Avic-X930BT Head Unit	Stereos today are so easy to install with a plug-n-play harness. No cutting or knowledge of wiring required for a basic install. Of course I later installed a GT500 steering wheel and wanted to wire in the stereo controls. That was fun :) This stereo hooks up to the iPhone and works like a champ.	★★★★☆
Pioneer TS-A6870AR 6X8 Speakers	I had originally had these in a Ford Explorer and removed them when I sold the car. I was happy to find that the door and rear valence speakers were this exact size. I replaced all 4 and it made a big difference in the quality of the sound.	★★★★☆
Moser Axles	This was an unplanned upgrade thanks to a hard 2nd a little too close to a cement barrier. The back end came around and the next thing I know I have a bent axle... Luckily that is all I had!	★★★☆☆
Exedy MACH 400 Clutch Kit and Aluminum Flywheel	This is an outstanding clutch kit that includes everything. For a stock or lightly modified car this is a perfect option. I burned my clutch out at the track and had to fix it. I decided to install an aluminum flywheel at the same time. My only regret was not going with the steel flywheel — my car never felt like it had the same low end torque out of the hole.	★★★★☆
Cervini 2.5 Cowl Hood	I bought this used from a guy that was setting his car back to stock. I loved this hood. The quality of these hoods is outstanding. It includes a full frame and maintains solid rigidity. One thing to note is this hood is considerably heavier than the stock aluminum hood that weighs about 35 lbs. This adds at least 10–15 lbs to the front of the car.	★★★★★
Fluidyne Aluminum Radiator	I bought this mainly because I got an outstanding deal and was planning at some point to build more power and need greater cooling capacity. For my setup this was unnecessary, but overall this radiator is very nice.	★★★★☆
BBK Throttle Body	I got this used with the electronics already installed. I never had a single issue with it. Throttle response and HP seemed to be improved. Overall I would definitely recommend it if you can find a good deal on one.	★★★★★
JLT Oil Separator	These are no brainers. The first time you clean your throttle body and see oil coming in you will want to get these. For the price I wouldn't run without them. Many brands to choose from, but the JLT ones are really nice. I kept mine and had them rebuilt for my GT500 later. JLT is an outstanding company to work with.	★★★★★